2012 Fuji Spray Tanning HVLP System- 2150 Salon Tan
Fuji Spray® Tanning HVLP Turbine Systems has been the leading manufacturer of HVLP Turbine Systems for almost 10 years. Three models are now available. The Fuji Salon TAN XT System™ #3000, the Fuji Mini TAN XT System™ #3000M and the Fuji Mini TAN M-Model System™ #2100M. The Fuji Spray Mini Spray Tanning Systems are not as quiet as the Salon model but are still 1/2 the noise level of any standard turbine. The Minis are the perfect choice for the mobile tanning tech. All other features are the same.
Fuji Spray manufacture not only the quietest spray tanning system for salon use but also the simplest to operate. There is only one adjustment for the operator and that is the fluid adjustment. Once you set this knob, there is nothing else for you to do - just aim,squeeze and spray!
Compare Fuji Spray Models
Model |
Salon TAN XT™ |
Mini TAN XT™ |
Mini M-Model™ |
Part # |
3000 |
3000M |
2100M / 2150 |
Spraygun |
XT |
XT |
M-Model |
Aircap Set |
1.0mm |
1.0mm |
1.0mm |
Nozzle & Needle |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Cup Type |
Gravity |
Gravity |
Bottom Feed |
Cup Capacity |
3 oz |
3 oz |
8 oz |
Hi-Flex™ Hose |
10 ft |
10 ft |
10 ft |
Motor Type |
2-Stage |
2-Stage |
2-Stage |
Turbine Dimensions |
17" x 13.5" x 11" |
11" x 8.6" x 8.1" |
11" x 8.6" x 8.1" |
Metric Dimensions |
43 x 33.5 x 28cm |
28 x 22 x 21cm |
28 x 22 x 21cm |
|
|
|
|
Gun Holder |
Mobile Stand |
On Turbine |
On Turbine |
Warranty |
24 Months |
24 Months |
24 Months | |
Features:
Fuji Spray Tanning HVLP System COMPONENTS
The Fuji XPC™ HVLP Spraygun
The Fuji XPC™ HVLP Spraygun features an exclusive side-mounted Pattern Control Knob to adjust the size of the fan. This knob allows you to switch from small to large pattern or anywhere in between. Unlike HVLP turbine Sprayguns with the front collar adjustment, the Pattern Control Knob offers you full incremental fan size throughout the whole range.
All Fuji HVLP Sprayguns are Non-Bleed. This means that air passes through the spraygun only when the trigger is pulled. All newer Fuji Turbines are designed and built with a bleed-off inside the turbine to allow use of any Non-Bleed Spraygun.
The benefits of Non-Bleed include...
-
Less blowing around of dust and negligible turbulence in the spray area.
-
Less solution buildup on the tip of the Fluid Nozzle.
-
Spraygun noise (hiss of air) appears to be lessened, because now the hiss of air is intermittent.
The Spraygun features a Stay-Cool Nylon Handle (fitted over a metal tube), Stainless Steel Fluid Passages and an External Needle Packing Adjustment. The Knobs and Collar are metal. The Fan Pattern is adjustable from 1” to 15” from 8" distance. Smaller than 1" is achieved by moving closer to the object to be sprayed. The large fan size pattern depends upon viscosity - thinner liquids = larger fan pattern. You can obtain a professional finish with all known coatings. The Gun Body is forged and CNC machined to aircraft tolerances.
The High-Efficiency™ Aircap
Fuji Spray R & D utilized computer Fluid Dynamics programs that yielded data suggesting improvements could be made to the angles and hole sizes in the Aircap. Once samples were made and tested, the Aircaps exceeded all expectations. The High-Efficency Aircaps provide the user with a cleaner spray pattern that results in less overspray and mist in the air. (Use less spray tanning solution)
The Fuji Spray Tanning HVLP System has very High-Efficiency and Aircap is an exclusive feature from Fuji sprayer.
With the Fuji spraygun, it's easy to make spray pattern changes. To increase or decrease the size of the fan pattern, simply turn the side-mounted Pattern Control Knob on the side of the spraygun. On vertical or horizontal setting, the pattern can be varied from a small ROUND pattern to large vertical or horizontal and all increments in betwen..
To switch from horizontal to vertical pattern, loosen the Collar, position the Aircap and tighten. By controlling the amount of spray tanning solution and air, you can even use the Fuji gun like an airbrush for subtle shading or touch-up. Reduce the amount of spray tanning solution (at the Fluid Adjusting Knob) then turn the Pattern Control Knob to the smallest pattern and move as close as possible to your client - you'll find you can spray pattern as small as 1/4".